international_ozone_august_2015Air Purification and Deodorization

Titan Hydroxyl Generators utilize a safe, effective, photo catalytic process developed by NASA, the rocket people. This process takes water vapor from the humidity in the air, H2O, and splits one hydrogen atom from the molecule leaving a single O (oxygen), and a single H (hydrogen), OH, which is a hydroxyl. The more H2O put into the Titan Hydroxyl Generator the more OH comes out. The Titan 4000 requires a minimum of 60 percent humidity entering the unit to perform effectively.

Air Movement

The Titan 4000 Hydroxyl Generator has a self-contained fan that moves 5,000 cubic feet of air per minute. This is very important in the case of hydroxyl molecules due to the fact that they can only exist for a maximum of two seconds. You must get them as far away from the production source as you can in those two seconds in order to purify the largest area possible.

international_ozone_august_2015_2Air Filtration and Air Scrubbing

The Titan 4000 also has great air filtration capabilities by incorporating an easily removable 20-inch-by-20-inch, 82-percent efficient, washable, electrostatic filter set into the back of the unit.
This filtration advantage actually turns the Titan 4000 into a very effective air scrubber. If you need HEPA filtration, a 20-inch-by-20-inch HEPA cartridge will fit perfectly into this unit.


Kick It Up a Notch!

As mentioned above, the Titan Hydroxyl Generators require water vapor entering the unit to produce hydroxyls. The more water vapor, the more hydroxyls produced and the quicker the Titan will finish the job. The best way to introduce water vapor into your Titan is with the Titan Hydroxyl Maximizer – Ultrasonic Cold Water Vapor Injector. The Maximizer will make your Titan perform like it is on steroids.



This content was provided by International Ozone as part of a paid advertisement.
For more information, please contact International Ozone directly at 877-406-9663 or visit